Shoal manipulation as an effective solution to site specific beach management, examples from three South Carolina beaches

Soft engineering solutions are the current standard for addressing coastal erosion in the US. In South Carolina, beach nourishment from offshore sand deposits and navigation channels has mostly replaced construction of seawalls and groins, which were common occurrences in earlier decades. Soft engineering solutions typically provide a more natural product than hard solutions, and also eliminate negative impacts to adjacent areas which are often associated with hard solutions. A soft engineering solution which may be underutilized in certain areas is shoal manipulation. (PDF contains 4 pages)

Phytoplankton periodicity: its motivation, mechanisms and manipulation

This review summarizes some recent work to find a generalized explanation of phytoplankton periodicity in lakes. Much of the observational and experimental evidence is drawn from work centred on the large enclosures (Lund Tubes) installed in Blelham Tarn, English Lake District. Observations on the phytoplankton in the tubes are related to the periodic changes that occur in natural lakes and it is suggested that such changes have common patterns, that they are due to common causes, that they are affected by similar processes and that they are therefore predictable and, potentially, manipulable.

Manipulation of chromosomes in fish: review of various techniques and their implications in aquaculture

Human ingenuity has made it possible to advent the chromosome manipulation techniques to produce individuals with differing genomic status in a number of fish using various causal agents such as physical shocks (temperature or hydrostatic pressure), chemical (endomitotics) and anesthetic treatments either to suppress the second meiotic division shortly after fertilization of eggs or to prevent the first mitotic division shortly prior to mitotic cleavage formation. This results in the induction of polyploidy (triploidy and tetraploidy), gynogenesis (both meiotic and mitotic leading to clonal lines) and androgenesis in fish population. The rationale for the induction of such ploidy in fish has been its potential for generating sterile individuals, rapidly inbred lines and masculinized fish, which could be of benefit to fish farming and aquaculture. In this paper, these are critically reviewed and the implication of recently developed chromosome manipulation techniques to various fin fishes is discussed.

Production of triploid African catfish, Clarias gariepinus (Burchell), using chromosome manipulation techniques

An experiment was conducted to induce triploidy in African catfish, Clarias gariepinus, using heat shock and cold shock techniques. Cold shock at a temperature of 0± 1°C and 5±1°C for a duration of 15, 30, 45 and 60 min and heat shock at a temperature of 40±0.5°C and 41 ±OS C for a duration of 1, 2 and 3 min was given to induce triploidy 5 min after fertilization. Maximum percentage of triploids (91.4%) were obtained in the heat shock at a temperature of 40±0SC for a duration of 1 min whereas cold shock at 0± 1 C for a duration of 60 min yielded 90% of triploids. Chromosome analysis revealed that diploids have 54 chromosomes and triploids have 81 chromosomes. The erythrocyte measurements of the minor axis and major axis were 1.17 times larger in treated fish than in controls. The growth studies showed that the growth rate was not significantly affected in triploids.

The effect of various salinity levels and stocking density manipulation methods on the survival of milkfish fry (Chanos chanos Forsskal) during storage

Results of the study indicate that the survival rate and increase in body weight did not differ significantly at different salinity levels or at different stocking density manipulation methods. A significant interaction between salinity and stocking density manipulation could not be demonstrated statistically. There apparently is no need to reduce the salinity of the water used in storing milkfish Chanos chanos fry in order to attain higher survival as commonly believed. Sufficient food and maintenance of good water quality are more important than salinity for higher survival of fry during storage.

Sexual Reproduction and Early Development in the Estuarine Sea Anemone, Nematostella vectensis Stephenson, 1935

This dissertation: 1) determines the factor(s) responsible for spawning induction in NematosteJla vectensis; 2) isolates, describes, and documents the source of jelly from egg masses of N. vectensis; and 3) describes N. vectensis' early development. Namatostella vectensis were maintained on a 7-day mussel feeding/water change regime over 159 days. Within 36 hours of mussel feeding/water change. 69.1% of females and 78.5% of males spawned reliably. Through manipulation of feeding, water change, oxygen and nitrogenous waste concentrations, spawning induction was found to be triggered by the oxygen concentration associated with water change, and not by feeding. Ammonia, anemones' major waste product, inhibited this induction in a concentration-dependent manner. Female N. vectensis release eggs in a persistent jellied egg mass which is unique among the Actiniaria. The major component of this egg mass jelly was a positive periodic acid-Schiffs staining, 39.5-40.5 kD glycoprotein. Antibodies developed in rabbits against this glycoprotein bound to jelly of intact egg masses and to granules (~ 2.8 IJm in diameter) present in female anemone mesenteries and their associated filaments. Antibodies did not label male tissues. Nematostella vecfensis embryos underwent first karyokinesis -60 minutes following the addition of sperm to eggs. Second nuclear division took place, followed by first cleavage, 90-120 minutes later. Each of the 4 blastomeres that resulted from first cleavage contained a single nucleus. Arrangement of these blastomeres ranged from radial to pseudospiral. Embryonic development was both asynchronous and holoblastic. Following formation of the 4-cell stage, 71% of embryos proceeded to cleave again to form an 8-cell stage. In each of the remaining 29% of embryos, a fusion of from 2-4 blastomeres resulted in 4 possible patterns which had no affect on either cleavage interval timing or subsequent development. The fusion event was not due to ooplasmic segregation. Blastomeres isolated from 4-celled embryos were regulative and developed into normal planula larvae and juvenile anemones that were 1/4 the size of those that developed from intact 4-celled embryos. Embryos exhibiting the fusion phenomenon were examined at the fine structural level. The fusion phenomenon resulted in formation of a secondary syncytium and was not a mere compaction of blastomeres.

Management of northern fur seals on the Pribilof Islands, Alaska, 1786-1981

This paper includes information about the Pribilof Islands since their discovery by Russia in 1786 and the population of northern fur seals, Cailorhinus ursinus, that return there each summer to bear young and to breed. Russia exterminated the native population of sea Oilers, Enhydra lulris, here and nearly subjected the northern fur seal to the same fate before providing proper protection. The northern fur seal was twice more exposed to extinction following the purchase of Alaska and the Pribilof Islands by the United States in 1867. Excessive harvesting was stopped as a result of strict management by the United States of the animals while on land and a treaty between Japan, Russia, Great Britain (for Canada), and the United States that provided needed protection at sea. In 1941, Japan abrogated this treaty which was replaced by a provisional agreement between Canada and the United States that protected the fur seals in the eastern North Pacific Ocean. Japan, the U.S.S.R., Canada, and the United States again insured the survival of these animals with ratification in 1957 of the "Interim Convention on the Conservation of North Pacific Fur Seals," which is still in force. Under the auspices of this Convention, the United States launched an unprecedented manipulation of the resource through controlled removal during 1956-68 of over 300,000 females considered surplus. The biological rationale for the reduction was that production of fewer pups would result in a higher pregnancy rate and increased survival, which would, in turn, produce a sustained annual harvest of 55,000-60,000 males and 10,000-30,000 females. Predicted results did not occur. The herd reduction program instead coincided with the beginning of a decline in the number of males available for harvest. Suspected but unproven causes were changes in the toll normally accounted for by predation, disease, adverse weather, and hookworms. Depletion of the animals' food supply by foreign fishing Heets and the entanglement of fur seals in trawl webbing and other debris discarded at sea became a prime suspect in altering the average annual harvest of males on the Pribilof Islands from 71,500 (1940-56) to 40,000 (1957-59) to 36,000 (1960) to 82,000 (1961) and to 27,347 (1972-81). Thus was born the concept of a research control area for fur seals, which was agreed upon by members of the Convention in 1973 and instituted by the United States on St. George Island beginning in 1974. All commercial harvesting of fur seals was stopped on St. George Island and intensive behavioral studies were begun on the now unharvested population as it responds to the moratorium and attempts to reach its natural ceiling. The results of these and other studies here and on St. Paul Island are expected to eventually permit a comparison between the dynamics of unharvested and harvested populations, which should in turn permit more precise management of fur seals as nations continue to exploit the marine resources of the North Pacific Ocean and Bering Sea. (PDF file contains 32 pages.)

Introduction to MLML_DBASE Programs

The MLML DBASE family of programs described here provides many of the. algorithms used in oceanographic data reduction, general data manipulation and line graphs. These programs provide a consistent file structure for serial data typically encountered in oceanography. This introduction should provide enough general knowledge to explain the scope of the program and to run the basic MLML_DBASE programs. It is not intended as a programmer's guide. (PDF contains 50 pages)

The BACOMA cod-end. History and recent developments in BACOMA cod-end regulations and a proposal for abetter specification of the BACOMA cod-end for Baltic Sea cod fishery

To improve the cod stocks in the Baltic Sea, a number of regulations have recently been established by the International Baltic Sea Fisheries Commission (IBSFC) and the European Commission. According to these, fishermen are obliged to use nets with escape windows (BACOMA nets) with a mesh size of the escape window of 120 mm until end of September 2003. These nets however, retain only fish much larger than the legal minimum landing size would al-low. Due to the present stock structure only few of such large fish are however existent. As a consequence fishermen use a legal alternative net. This is a conventional trawl with a cod-end of 130 mm diamond-shaped meshes (IBSFC-rules of 1st April 2002), to be increased to 140 mm on 1st September 2003, according to the mentioned IBSFC-rule. Due legal alterations of the net by the fishermen (e.g. use of extra stiff net material) these nets have acquired extremely low selective properties, i. e. they catch very small fish and produce great amounts of discards. Due to the increase of the minimum landing size from 35 to 38 cm for cod in the Baltic, the amount of discards has even increased since the beginning of 2003. Experiments have now been carried out with the BACOMAnet on German and Swedish commercial and research vessels since arguments were brought forward that the BACOMA net was not yet sufficiently tested on commercial vessels. The results of all experiments conducted so far, are compiled and evaluated here. As a result of the Swedish, Danish and German initiative and research the European Commission reacted upon this in June 2003 and rejected the increase of the diamond-meshed non-BACOMA net from 130 mm to 140mm in September 2003. To protect the cod stocks in the Baltic Sea more effectively the use of traditional diamond meshed cod-ends with-out escape window are prohibited in community waters without derogation, becoming effective 1st of September 2003. To enable more effective and simplified control of the bottom trawl fishery in the Baltic Sea the principle of a ”One-Net-Rule“ is enforced. This is going to be the BACOMA net, with the meshes of the escape window being 110 mm for the time being. The description of the BACOMA net as given in the IBSFC-rules no.10 (revision of the 28th session, Berlin 2002) concentrates on the cod-end and the escape window but only to a less extent on the design and mesh-composition of the remaining parts of the net, such as belly and funnel and many details. Thus, the present description is not complete and leaves, according to fishermen, ample opportunity for manipulation. An initiative has been started in Germany with joint effort from scientists and the fishery to better describe the entire net and to produce a proposal for a more comprehensive description, leaving less space for manipulation. A proposal in this direction is given here and shall be seen as a starting point for a discussion and development towards an internationally uniform net, which is agreed amongst the fishery, scientists and politicians. The Baltic Sea fishery is invited to comment on this proposal, and recommendations for further improvement and specifications are welcomed. Once the design is agreed by the Baltic Fishermen Association, it shall be proposed to the IBSFC and European Commission via the Baltic Fishermen Association.

Potentials for fisheries in the Niger Delta: Another green light for self sufficiency in regional food production

A discussion is presented on the potential for fishery development in the Niger Delta region, considering engineering activities and food production potentials of the freshwater zone and immediate hinterland, the brackishwater mangrove swamps and the estuaries. An examination of current trends in the environment indicates that a possible solution to improved exploitation of the region lies in hydraulic engineering, the manipulation of environmental conditions through varying freshwater and seawater inputs so as to increase aquatic and wetland productivity

Integrating cultural, economic and environmental requirements for fish production in Borno State

The study examines the integration of cultural, economic and environmental requirements for fish production in Borno State, Nigeria. A reconnaissance survey was conducted transferring some selected Local Government Areas. 60 questionnaires were administered in the six Local Governments representing Southern Borno State with Biu and Shani, central Borno with Konduga & Jere and Northern Borno with Gubia and Kukawa respectively. There is no cultural constraint to fish production but about 63% prefers to invest in other farming activities than in fish farming. 33% are not aware that fish can be cultured apart from getting it from the wild. 35% have the impression that fish farming ventures can be handled by government only. The economic earnings for fish production are high especially in some parts of Northern Borno, but the Local market potentials throughout the state are great. Nigeria has suitable soil for ponds apart from few locations at the central and Northern Borno that are made by sandy soil. Numerous perennial and seasonal rivers, streams, lakes, pools and flood plains adequate for fish culture especially in Southern Borno exist. The mean annual rainfall can result in some water storage in ponds. In areas where the annual precipitation is less than 550mm, exist few flow boreholes with potentials for fish production. The temperature regime may support growth and survival of fish even during the hottest months of the year (March, April and May). With the understanding and manipulation of these requirements, fish production in Nigeria can be greatly enhanced

Use of Artificial Eelgrass Mats by Saltmarsh-Nesting Common Terns (Sterna hirundo)

Terns and skimmers nesting on saltmarsh islands often suffer large nest losses due to tidal and storm flooding. Nests located near the center of an island and on wrack (mats of dead vegetation, mostly eelgrass Zostera) are less susceptible to flooding than those near the edge of an island and those on bare soil or in saltmarsh cordgrass (Spartina alterniflora). In the 1980’s Burger and Gochfeld constructed artificial eelgrass mats on saltmarsh islands in Ocean County, New Jersey. These mats were used as nesting substrate by common terns (Sterna hirundo) and black skimmers (Rynchops niger). Every year since 2002 I have transported eelgrass to one of their original sites to make artificial mats. This site, Pettit Island, typically supports between 125 and 200 pairs of common terns. There has often been very little natural wrack present on the island at the start of the breeding season, and in most years natural wrack has been most common along the edges of the island. The terns readily used the artificial mats for nesting substrate. Because I placed artificial mats in the center of the island, the terns have often avoided the large nest losses incurred by terns nesting in peripheral locations. However, during particularly severe flooding events even centrally located nests on mats are vulnerable. Construction of eelgrass mats represents an easy habitat manipulation that can improve the nesting success of marsh-nesting seabirds.

Processes controlling the quantities of biogenic materials in lakes and reservoirs subject to cultural eutrophication

The processes which control the growth, composition, succession and loss from suspension of phytoplankton algae are briefly reviewed, with special reference to function in eutrophic reservoir systems. The ecology of larger algal biomasses supported by high nutrient loading rates are more likely to be subject to physical (wash-out, underwater light penetration, thermal stability and mixing) than to chemical constraints. Sudden changes in the interactions between physical factors temporarily impair the growth of dominant algal species, and advance the succession. Certain algae may be cropped heavily, but selectively, by zooplankton feeding, but they are rarely the species which cause problems in waterworks practice. Grazing, however, does influence succession. A deeper understanding of the operation of loss control mechanism is urgently required. Potentially, manipulation of the physical environment provides an important means of alleviating day-to-day algal problems in eutrophic reservoirs; in terms of cost effectiveness these may prove to be more attractive than reducing nutrient loads at source.

Potential of genetics for aquaculture development in Africa

Aquaculture in Africa is fairly insignificant by world standards and accounts for a mere 0.4 per cent of global aquaculture production. The application of genetics can play an important role in efforts to increase aquaculture production in Africa through methods such as selective breeding, hybridization, chromosome manipulation and use of YY “supermales”. Other issues that need to be addressed are limited genetic research facilities, funding, human capacity and suitable species for aquaculture.